Weller WRK - Manual (Page 3)

WRK 3-9
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
2.1 Safety Information
Always place the Reflow Nozzles in the original holder
Remove all inflammable objects from the proximity of the hot
soldering tool.
Use suitable protective clothing to prevent the risk of burns
associated with molten solder.
Never work on electrically live circuits or components.
Always wear eye protection when working with soldering and
desoldering applications.
3 Description of the WRK
The Weller WRK Removal Kit optimizes the rework process and
enables SMT components to be removed precisely and without being
damaged.
The removal procedure can be optimized for each component size
between .120" and 1.181", (3 mm and 30 mm) with the aid of the
different reflow nozzles.
The reflow nozzles are suitable for the use of the HAP 1 and
HAP 200 Hot Air tools.
Suitable reflow nozzles for HAP 1 and HAP 200
Large
Reflow
nozzles
Small
Reflow
Nozzles
4 Initial Setup
WARNING!
•
Risk of injury due to incorrectly connected vacuum
hose.
Z Never connect the vacuum hose to the "Air“ port!