Viking Pump NORD TSM For NORDBLOC.1 Reducers - Manual (Page 17)

DRIVESYSTEMS
NORDBLOC
®
.1
OIL PLUG & VENT LOCATIONS
RETAIN FOR FUTURE USE U14700 - 1 of 1
= Vent
= Oil Level
= Oil Plug
Oil plug connections
Prior to commissioning the reducer, check the oil-fi ll level using the reducer’s oil-level plug and drain or add additional oil as
needed. The minimum acceptable oil level is 0.15 in (4mm) below the oil level hole. For mounting orientations other than
shown please consult NORD Gear. New plug locations may be required.
www.nord.com/docs 06.01.11
NORD Gear Corporation
Toll Free in the United States: 888.314.6673
NORD Gear Limited
Toll Free in Canada: 800.668.4378
SK 072.1
SK 172.1
M1
B3
M2
B6
M5
V5
M3
B8
M4
B3I
M6
V6

SK 072.1 F
SK 172.1 F
M1
B3
M2
B6
M5
V5
M3
B8
M4
B3I
M6
V6

SK 372.1
SK 572.1
SK 672.1
SK 373.1
SK 573.1
SK 673.1
M1
B3/B5
M2
V6/V3
M5
B6/B5II
M3
B8/B5I
M4
V5/V1
M6
B7/B5III
SK 372.1 F
SK 572.1 F
SK 672.1 F
SK 373.1 F
SK 573.1 F
SK 673.1 F
M1
H1/B5I
M2
H4/B5
M5
H5/V1
M3
H2/B5III
M4
H3/B5III
M6
H6/V3
 Units are shipped with a predetermined oil fill quantity based on mounting position