0 seals 5.1 single seal sla – slg – Viking Pump TSM288: SL Series Lobe Pumps User Manual
Page 23
fIGURE 74
fIGURE 76
8.01
fIGURE 73
8.02
8.04
8.06
8.07
8.05
8.03
8.09
8.08
fIGURE 75
8.08
8.09
fIGURE 72ii
fIllING POINT
fIGURE 72i
1.01
1.03
fIGURE 71
1.01
1.02
SECTION TSM 288
ISSUE
A
PAGE 23 OF 36
5.0 sEals
5.1 sINGlE sEal sla – slG
• Install the seal washers (8.08) and the seal screws (8.09)
The washers overlap the seal bore – this locates and provides
drive to the seal.
• Install the head O-ring (1.02) into the head (1.01)
• Install the head (1.01) and secure with the dome nuts
(1.03). (See section 6.2 for torque settings)
• Rotate pump so filler hole is uppermost, add lubricant. (See
section 6.4 for lubricants and quantities)
See also other documents in the category Viking Pump Pumps:
- UDF400: DFO Start-UP Guide (16 pages)
- TSM000: General Information (8 pages)
- TSM110.2: Heavy Duty LV3900 (6 pages)
- TSM141.1: G-LL 125/4125 (16 pages)
- TSM141.2: LS-M 125/4125 (12 pages)
- TSM142.1: H-LL 225/4225 (14 pages)
- TSM142.2: LS-M 225/4225 (14 pages)
- TSM143: N-P 335/4335 (15 pages)
- TSM144: GG-AL 495/4195 (10 pages)
- TSM1470: HI-LO Double Pumps (8 pages)
- TSM151.1: H-LL 123/4123 (13 pages)
- TSM151.2: LS-M 123/4123 (14 pages)
- TSM153: N-R 333/4333 (16 pages)
- TSM154: GG-AL 493/4193 (10 pages)
- TSM161.3: LS-M 127/4127 (12 pages)
- TSM163: N-R 337/4337 (15 pages)
- TSM164: GG-AL 4197 (10 pages)
- TSM211: F-G 724/4724 (8 pages)
- TSM212: H-LL 724/4724 (9 pages)
- TSM230: Hygienic Series (15 pages)
- TSM270: RL41507 Industrial Rotary Lobe (10 pages)
- TSM270.1: RL 16 and 25 Standard (12 pages)
- TSM270.2: RL 16 and 25 High Pressure (12 pages)
- TSM275: AL-05 (33 pages)
- TSM280: Duralobe (Discontinued) (78 pages)
- TSM285: Classic+ Lobe Pump (36 pages)
- TSM310.1: C-FH 32/432 (7 pages)
- TSM312: G-N 32/432 (11 pages)
- TSM320.1: C-FH 56/456 (7 pages)
- TSM320.2: GG-HL 75/475 (9 pages)
- TSM340.0: SG-04, -05, -07 (10 pages)
- TSM340.1: SG-10, SG-14 (11 pages)
- TSM341.1: SG Mag Drive Series (19 pages)
- TSM343.1: Vi-Corr Mag Drive (13 pages)
- TSM343.3: Vi-Corr Pumps (20 pages)
- TSM344: CMD Mag Drive (24 pages)
- TSM350 HG-08/HG-10 Helical Gear Pumps (10 pages)
- TSM410.1: F-FH 4625 (5 pages)
- TSM410.2: H-M 4625 (10 pages)
- TSM420: HL-LL 4925 (18 pages)
- TSM430: HL-N 34/434 (9 pages)
- TSM442: GG-AL 4195-G LP-Gas (10 pages)
- TSM443: K-LL 4205-G LP Gas (8 pages)
- TSM445: LVP Vane Pumps (11 pages)