Unitec Portal Console - Manual (Page 15)

P O R T A L T I
Document Number: PTL1005 11
Figure 8. Check-Void Code Screen
To check or void a code, press the appropriate button on the sales screen. Enter the code.
The console will display a message stating whether the code was either valid or invalid, or will
disable the code.
4.3 Console Diagnostics
The console software allows you to configure Console Settings and Touch-Screen
Calibration, and to test the Printer and Card Reader.
Note:
In order to access the following screens, you must have the keyboard connected to the
Console.
4.3.1 Calibrate the Touch-Screen
The Touch-Screen converts taps on the screen to mouse-clicks. Sometimes tapping on the
screen will produce an inaccurate mouse-click. The calibration utility allows you to make the
taps more accurate by recording where the mouse-click is supposed to be in relation to the
touch-screen.
To launch the touch-screen calibration utility, press the F2 key on the keyboard and follow the
instructions on the screen.
Document Title: Portal TI Console Installation and Operations Manual