Introduction, Log-in, 1 introduction – Unitec C-Start Owner’s Manual User Manual
Page 9: 2 log-in
C - S T A R T
Document Number:
CST1002
1
Document Title: C-
Start Owner’s Manual
1 Introduction
The C-Start is touch-screen based car wash payment system that is designed to work at any in-bay
automatic or conveyor and is perfect for convenience stores (C-store) or any car wash that does not wish
to accept cash as payment. This Owner’s Manual describes the programming features and provides
information on daily operations and recommended maintenance.
For detailed information on how to install the C-Start and for networking information, please see the C-
Start Installation Manual. For detailed information on how to program the C-Start, please see the Sierra
Management Application Operations Manual. All of these manuals are available on the manufacturer’s
website:
2 Log-In
The Sierra Management Application is used for programming the system operating parameters, viewing
and printing reports, and managing house accounts and car wash promotions. A PC with a standard WEB
browser is required to use the management functions. The PC can be located either on-site or off-site. The
C-Start Installation Manual provides guidelines for connecting a PC to the local site network.
A PC with a standard Internet browser is required to access the Sierra Management Application. The PC
can be located either on-site or off-site. The entry system unit’s Installation Manual provides guidelines
for connecting a PC to the local site network.
To access the management application, type the following into the address bar:
(where XXX equals your site IP address).
When a connection to the server is established, the login page should appear (as shown below). At initial
startup, you will use the Owner user account (user ID 00, password 00).