Unitec C-Start Owner’s Manual - Manual (Page 13)

C - S T A R T
Document Number: CST1002
5
Document Title: C-
Start Owner’s Manual
3 Set-up Functions
The Set-up function are used to program the C-Start’s operational settings and for managing system users.
C-Start programming should be performed during installation by your Unitec distributor, but there are
some settings that an equipment owner may wish to change, periodically. This section of the manual
describes the programmable features that are available. For specific details on using these features, see
the Sierra Management Application Programming Manual on the manufacturer’s website:
www.StartwithUnitec.com .
3.1 General Site Information
Site information should be set during installation and would not typically need to be changed. The
programmable features under site information include the site name and ID (as shown on reports and
notifications), accounting close time, and credit card account set-up.
3.2 Product Programming
Products are Wash Packages or Added Services that can be purchased by a customer. The products will
need to be set up by the installing distributor, but the equipment owner may need to access this feature
to change prices or change the Added Services that will be offered with the wash packages.
3.3 C-Start Programming
The C-Start’s is configured by creating a ‘device profile’ and downloading the profile to the C-Start.
Whenever a change is made to the device profile, the associated devices will need to be downloaded with
the revised profile to implement the changes. The device profile configuration file includes a series of set-
up pages, which are described in the following sections.
3.3.1 General Information
The Edit Profile Information page is used to program some general operational settings of the C-Start
including:

Upgrades – When upgrades are enabled, a customer using a prepaid wash code or account
will be offered to upgrade to a better wash by adding more payment. Upgrades are disabled
by default, but can be enabled for wash codes (bought at the pump or in the C-store), pre-paid
house accounts and/or, subscription house accounts.
3.3.2 Operating Schedule
The Operating schedule allows you to automatically set an opening and closing time for your car wash.
The message that is displayed when the site is closed can be programmed on the User Interface Set-up