Unitec C-Start Owner’s Manual - Manual (Page 67)

C - S T A R T
Document Number: CST1002 59
Document Title: C-Start Owner’s Manual
2. Briefly press the TEACH button. The yellow LED will flash off then on again after 2
seconds.
3. Place the flat object in front of the proximity sensor at the MINIMUM distance you wish the
proximity sensor to detect approaching vehicles (at least 6”).
4. Briefly press the TEACH button. The yellow LED will flash off then flash on 5 times.
5. The settings are now saved in the proximity sensor.
10.5 Thermal Printer
The C-Start is equipped with the Hecon thermal printer. The Hecon printer uses paper rolls
2.28” to 2.36” wide by up to 400’. The thermal printer is capable of printing graphics and
barcodes, as well as system reports.
Figure 54. Hecon Printer
The following sections contain information and procedures important for peak operating
performance.

Replacing the Printer Paper

Cleaning the Head

Clearing a Paper Jam

Manually Printing a Self-Test