Tweco C-70A CUTSKILL - Manual (Page 14)

Introduction 2-2 Manual 0-4679
2.04 Torch Specifications
Torch Configuration
Torch Head at 75° to
Torch Handle
Torch Leads Length 20 feet (6.1 m)
Ambient
Temperature 104° F
40° C
Torch Duty Cycle
100% @ 100 Amps
@ 400 scfh
Maximum Current
100 Amps, DC,
Straight Polarity
Voltage (V
peak
) 500V
Arc Striking Voltage 7kV
Type of Cooling
Ambient air and gas
stream through torch
Parts-in-Place:
Built-in Switch
in Torch Head
Gas Requirement:
Single Gas,
Compressed Air Only
Input
Gas Pressure .5MPa (5 bar) -
.86MPa (8.6 bar)
Minimum Gas Flow
400 scfh 6.6 scfm
(188.7 lpm)
Plasma Power
Supply Used With:
C-70A
SL100™ 1Torch™ Ratings for C-70A
2.05 System Contents
ITEMS Description Q'ty
Power Source Model C-70A 1
Torch Set SL100™, 20' (6.1m) 1
Added
Features
Air Regulator
Work Cable
Manual
Torch Electrodes
Torch Tips 1
1
1
2
3
Input Power
Cable For
Systems
1-1670-1
2 Meter 6 AWG SOW with
6 - 50 P molded plug
1
Input Power
Cable For
Systems
1-1670-3
1-1670-4 (CE)
2 Meter Cord With No Plug
1
If you have questions or concerns regarding your sys-
tem, please contact:
Thermal Dynamics Technical Service Dept.
Tel: 1-800-752-7622 (1-800-PLASMA2)
Fax: 1-800-221-4401
e-mail address: [email protected]
2.06 Transporting Methods
Lift unit with handle on top of case. Use handcart or
similar device of adequate capacity for transporting.
WARNINGS
ELECTRIC SHOCK can kill. DO NOT
TOUCH live electrical parts. Disconnect input
power from supply before moving the power
source.
FALLING EQUIPMENT can cause serious per-
sonal injury and equipment damage.