Tweco AirCut 15C - Manual (Page 17)

Introduction 2-3 Manual 0-4965
AIRcut 15c
2.07 Torch Specifications
8 in (203 mm)
1.1 in (27 mm)
2.9 in
(75 mm)
Art # A-07719
PCH-10 Torch Ratings
Torch Configuration
Torch Head at 70° to
Torch Handle
Torch Leads Length 20 feet / 6.1 m
Duty Cycle 100% @ 10 Amps
Maximum Current
15 Amps, DC,
Straight Polarity
Type of Cooling
Ambient air and gas
stream through torch
Parts-in-Place:
Built-in Switch
in Torch Head
Gas Requirement:
Single Gas, Internal
Compressed Air Only
Plasma Power
Supply Used With:
AirCut™
2.08 System Contents
Description ITEMS Q’ty
Power source Model AirCut™ 1
Torch Set
PCH-10, with 20’
(6.1 m) leads
1
Accessories &
Consumables
Work Cable
Manual
Torch Electrodes
Torch Tips
1
1
2
3
Input Power
Cable U.S.
16/3 with molded plug 1
2.09 Transporting Methods
Lift unit with handle on top of case. Use hand-
cart or similar device of adequate capacity for
transporting over long distances.
WARNINGS
ELECTRIC SHOCK can kill. DO NOT
TOUCH live electrical parts. Disconnect input
power from supply before moving the power
source.
FALLING EQUIPMENT can cause serious
personal injury and equipment damage.