Teradek Bolt Manager Software - Manual (Page 3)

© 2 0 1 4 . T e r a d e k , L L C P a g e | 3
Bolt Device Information
The top left portion of Bolt Manager displays information about the connected device. Bolt Pro 300, 600,
and 2000 connect to your computer via a standard Mini-B USB cable (not included). Note: The USB 3.0
port on Bolt receivers is used for video only, not cofiguration.
Bolt’s USB configuration port is located on the left side of both the transmitter and receiver. It can be
found just above the HDMI port, or the port cover on SDI-only models.
Figure 2 Bolt USB ports
Once Bolt is connected and powered on, the Model description, serial number, and ‘Connected’ status
will be shown in the top left portion of Bolt Manager. You can now configure or upgrade Bolt.
Figure 3 Device not connected Figure 4 Device Connected