Canon Elura 70 - Manual (Page 32)

32
Playing Back a Tape
If the playback picture is distorted, clean the video heads using a Canon Head
Cleaning Cassette or a commercially available digital video head-cleaning cassette
( 143).
1. Set the camcorder to PLAY (VCR)
mode.
Set the POWER switch to PLAY (VCR) and
the TAPE/CARD switch to b.
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing outward.
3. Press the
` button to rewind the
tape.
4. Press the
e/a button to begin
playback.
5. Press the 3 button to stop
playback.
❍ To use the viewfinder, close the LCD panel.
❍ About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
q
CAMERA CAMERA
(VCR) (VCR) PLAY PLAY
NETWORK NETWORK
POWER POWER
w
e
r
t