TeachLogic Titan Neo - Manual (Page 31)

31
Owner’s Manual
TROUBLESHOOTING
product description
UT-96BP Body-Pack Transmitter Microphone
Contact
If you should encounter
some unresolved issue,
please contact TeachLogic
customer service
department for further
assistance.
1
•
800
•
588
•
0018
[email protected]
1
•
760
•
631
•
1283
www.teachlogic.com
Power LED does
not illuminate after
switching on
LCD panel displays
garbled information
Signal
disturbance • Check batteries are
charged and inserted
correctly.
• Check frequency of trans-
mitter is the same as the
portable PA receiver
• Check mute button is not
activated
• Ensure body-pack is within
range of the receiver
• Check for sources of
interference, large metal
objects etc within range of
the body-pack
• When operating two
transmitters in the same
area, ensure frequencies
selected are several chan-
nels apart. This helps to
reduce crosstalk between
transmitters. Also note that
other wireless devices can
cause interference, ensure
you adjust your frequency
around these devices
where possible.
Problem Solution
ERR Message
The ERR message may
show up on the units ALS-
960, DR-702, DR-702D,
DR-800, TX-800 and
UT-96BP or UT-96HH. In
brief, any wireless-based
devices that carry a LCD
panel might have this
potential problem. While
the possibility of a glitch is
unlikely, it is a possible.