TeachLogic Titan Neo - Manual (Page 16)

2
16
Titan Neo
product description
Titan Neo COMPONENTS & OPERATION
CD-800S Player Functions
POWER
• ON: Press Power to switch on the power.
• OFF: Press and hold Power to switch off the power.
LCD DISPLAY Displays CD status including track number and playing time.
SD/USB/CD Press this key to change USB, SD or CD mode.
FB Select fast backward. Then press “PLAY/PAUSE“ for normal playback.
FF Select fast forward. Then press “ PLAY / PAUSE“ for normal playback.
FOLDER Selects pre-programmed folders. Available when playing MP3
format files. Press FOLDER key again to advance to next folder.
REV Press to desired previous track number.
FWD Press to desired next track number.
PLAY/PAUSE Press once to play, press again to pause.
STOP/EJECT Press to stop playing, press again to eject disc.
Infrared window Picks up signal from the remote controller.
USB Connector Accepts USB Drive
SD Connector Accepts SD Card and MMC Card.
LO-PITCH To adjust slow-speed play. Press once, the screen will indicate
PH-01, press again, the screen will indicate PH-02. There are 10 steps of
speed variation.
HI–PITCH To adjust fast-speed play. Press once, the screen will indicate
PH-01, press again, the screen will indicate PH 02. There are 10 steps of
speed variation.
NOR–PITCH To adjust the speed to zero. Press NOR/PITCH key, the speed
will be zero back to normal play.
POWER
USB
SB/USB FOLDER FB FB REV FWD
HI
NOR
LO
STOP/EJ
PLAY/
PAUSE