Clarion OHM156 - Manual (Page 32)

32 OHM106/156
English
7. Troubleshooting
System or DVD does not work
1. Turn on the ignition.
2. Turn on the DVD player.
3. Make sure there’s a DVD in the DVD player.
4. Press play on the remote control.
Possible remedies
If the monitor does not respond:
• Check the fuses at the end of the monitor installation cables and on the vehicle.
• Check all connections. See the installation instructions.
• Change the batteries in the remote control.
• Dirt may be covering the remote’s infrared lens. Clean the lens with a damp cloth.
In rare cases your DVD system may not function the way you expect it to. Before
calling for service, read the operating instructions for the DVD.
8. Glossary
audio/video source: any audio and/or video device that has a composite RCA output,
such as a DVD player, game player, VCR, digital camera, etc.
Main screen: primary area of the screen for displaying output from a video source.
Sub screen: secondary area of the screen for displaying output from a video source.
OSD: on-screen display
9. Specifications
Power supply 12V DC (10V-16V)
Test voltage 12V, negative ground
Current consumption OHM106: 1 Amp OHM156: 1.9 Amps
Max current consumption OHM106: 1.1 Amps OHM156: 2 Amps
Operating temperature OHM106: 0 ~ 60° C OHM156: 0 ~ 50° C
Storage temperature OHM106: -30 ~ 85° C OHM156: -20 ~ 60° C
Video system Auto NTSC and PAL
Screen OHM106: 10.2” diagonal OHM156: 15.4” diagonal
Resolution OHM106: 800 x 480 OHM156: 1280 x 800
Weight OHM106: 3.8 lbs. OHM156: 7.2 lbs.
Video signal 1Vp-p with 75-Ohm load 200mV to 8 Volts
Note:
For the sake of technical improvements, this technical data and the
design of the equipment may change without prior notice.
OHM.pmd 2006-02-28, 13:00 32