Clarion OHM156 - Manual (Page 10)

10 OHM106/156
English
Changing image aspect ratio
A common display setting to change is screen mode, which controls the aspect ratio
used to display images.
To change the aspect ratio of the main screen, press MODE in the Main or Sub
sections of the remote.
Note:
If you don’t select a mode, the system waits for five seconds and returns
to the previous mode selection.
Viewing two video sources at once
First, choose how to view both video sources. Then, decide which source to view in the
main display and which to view in the sub display.
Select how to view the two sources
1. Press PIP in the Main section of the remote.
2. Press SIZE in the Sub section of the remote control.
Show only Show Show primary
one video secondary source and secondary sources
source in small window side by side
Assign the sources to the main and sub screens
1. Press INPUT in the Main section of the remote to select the primary audio/video
source.
2. Press INPUT in the Sub section of the remote to select the secondary audio/video
source.
OHM.pmd 2006-02-28, 13:00 10