Clarion OHM156 - Manual (Page 20)

20 OHM106/156
English
6. Saving your preferences
Changes you make by pressing the buttons in the Main and Sub sections of the remote
control affect only your current viewing session. If you define your viewing preferences
using the on-screen display (OSD) menus, the monitor stores your preferences so that
you don’t have to reconfigure the monitor every time you use the system.
For example, by default, picture-in-picture always displays in the upper right corner of
the main picture. Through the main and sub OSD menus, you can change the location
of the sub picture to anywhere on the screen.
Accessing the on-screen display menus
• Press MENU on the remote to access the OSD menus.
The main Display menu appears.
• Press MENU again to access each of the other option menus: MAIN > SUB > OSD
> FACTORY DEFAULT
• Press (left arrow) and (right arrow) in the DVD control section of the remote to
alternate among the options on the current menu.
• Press (up arrow) and (down arrow) to alternate menu settings for the
currently-selected option.
• Once you’ve selected a setting, press to increase and to decrease the value for
the setting.
• Press ENTER on the remote to confirm your selection and exit the on-screen
display menus.
To configure options, use the
MENU, arrow keys and
ENTER.
(The ENTER and arrow keys
also control the DVD player.)
OHM.pmd 2006-02-28, 13:00 20