SONIQ L32V11D-NZ - Manual (Page 26)

1. Insert the power cord plug into a polarized AC outlet.
2. If TV is in standby mode Press POWER button on
the remote control or button on the bottom panel
of LCD TV.
3. Normal picture will be displayed on the screen after 15 seconds. If no signal input,
"No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or
button on the bottom panel.
5. If you want to completely switch off the power for this unit, unplug the power cord plug
for this unit.
6. After switching off the unit, you should
Status indication lamp
Power indicator is lighted: In standby mode.
Auto power-off
If there is no signal, the TV will 10 minutes.
Memory before turning TV off
wait at least 5 seconds before switching on again.
automatically enter standby mode after
See 'Auto sleep' pg. 36 for more details.
The picture and sound settings and preset channels will be memorised at the point when
the TV is turned off. When the TV is started up again it will work accordingly with these
settings.
1
How to turn the TV on or off
2 2 2 24
Basic Operation
Turning the TV On and Off