SONIQ I402 - Manual (Page 17)

Chapter 7 Setup (2)
-17-
6. Using the same method to set year, month and date, then it is done!
7.5 How to Set Snooze Time?
Note: When alarm is coming, if you want alarm sound again 5-10 minutes later, you can
1. Press and hold MENU until it shows ‘Set EQ’, then
press or to ‘ Snooze time’ , p ress SELECT to
confirm.
2. Press or to browse options which you will find 5-10 minutes available.
3. Press SELECT to confirm your expecting snooze time, then it is done.
7.6 How to Set Backlight?
1. Press and hold MENU until it says ‘Set
EQ’, and then turn SCROLL/SELECT to
‘ Backlight’ , press this knob to confirm.
For Active mode:
a. Continue the above step 1, press SCROLL/SELECT to enter backlight setting for active
mode.
b. Turn SCROLL/SELECT to adjust backlight level form 1-5, while your selecting level
shows up, press this knob to confirm.
For Standby mode:
a. Continue the above step 1, turn SCROLL/SELECT to ‘Standby’, and then press this
knob to enter backlight setting for standby mode.
b. Turn SCROLL/SELECT to adjust backlight level form 01-05, while your selecting level
shows up, press this knob to confirm.
3. It is recommended to choose ‘ DAB Autocorrect’
so that the clock time can be synchronised from
the DAB broadcaster automatically. However, in
case your living area is not following the time zone
with DAB broadcaster, please choose ‘ Manual’ to set clock as follows.
4. To set clock manually, continue the above step 2, press or to ‘ Manual’, and then
press SELECT to confirm.
5. The display will ask you to set hour, press or to alter the hour, press SELECT to
confirm, and then you can set the minutes.