SONIQ I402 - Manual (Page 14)

Chapter 5 FM Radio
-14-
5.1 Turn on FM Radio
1. Press MODE repeatedly to enter FM mode.
Note: For initial use, it will start at the beginning of the
FM frequency range (87.50MHz). Otherwise, the last
listened FM station will be selected.
5.2 The Ways of SCAN Stations
1. While frequency is showed up, press SCROLL/SELECT knob on main unit or press
SELECT on remote control to auto search the next station. Besides, press or
on remote control to increase or decrease 0.05 MHz per step.
2. Simply press SCAN on remote control to perform auto-scanning.
Note: During this process, the unit will display the frequency changing until it stops on the next
station, after it reaches to the end of the frequency range, it will restart search from the beginning
of FM frequency range.
No RadioText
Note: If FM signal strength is good, the radio will play as Stereo mode. However, if FM signal
strength is poor, the radio may play as Mono mode to reduce the sound effect by interference.