SONIQ I402 - Manual (Page 16)

Chapter 7 Setup (1)
-16-
7.1 How to Enter Setup?
1. Press and hold MENU, it will display “Set EQ”, and
then turn SCROLL/SELECT to browse options.
Note: At this step, you can enter ‘Set EQ’, ‘Set clock’, ‘Set
alarm’, ‘Set sleep’, ‘Backlight’, ‘Snooze time’ and ‘MCU version’
and ‘Reset’ 8 options.
2. When the desired one is appeared, press SCROLL/SELECT to confirm.
7.2 How to Set EQ?
Note: Equaliser is short named as EQ. Several preset EQ modes are available, plus a
user-defined setting through ‘My EQ’.
1. Press and hold MENU, it will display “Set EQ”, press SCROLL/SELECT to confirm.
2. Turn SCROLL/SELECT to scroll up and down, by
which you could have ‘Rock’, ‘Pop’, ‘Classic’, ‘Jazz’,
‘My EQ’
and ‘Normal’ available.
Note: ‘My EQ’ can adjust Bass and Treble.
3. While your selecting option shows up, press SCROLL/SELECT to confirm, it is done!
7.3 How to Set Sleep Time?
Note: this time, let’s pick up remote control to set sleep.
1. Press and hold MENU until it says ‘Set EQ’, then press or on remote control to
reach ’ Set sleep’, press SELECT to confirm.
2. Press or to scroll up and down, you will find
off/15/30/45/60/90 minutes available.
3. Press SELECT to confirm your preferred sleep period,
sleep icon should be showing up.
4. Radio will automatically put itself into standby mode after the setting time has elapsed.
5. To continue enjoying your program, press
.
7.4 How to Set Clock?
Note: This time, let’s also pick up remote control to set Clock.
1. Press and hold MENU until it says ‘Set EQ’, and then press or to ‘Set clock’.
2. Press SELECT to confirm, you can see two option: ‘DAB Autocorrect’ and ‘Manual’.