SONIQ I402 - Manual (Page 12)

-12-
Chapter 3 CD
WARNING! Physical damage through improper operation!
Do not insert any mini CDs or audio carriers that differ from the standard CD
formats into the CD player. Those may potentially not play properly and may
not be ejected again. Only insert one CD into the CD player.
3.1 Insert CD to CD Tray
Note: In order to play CD, please insert the Audio CD. Some CDs may be incompatible
1. Press SOURCE repeatedly to convert to CD mode, then ‘NO DISK’ is twinkling, or no
need convert to CD mode at first, simply directly skip to step2 as below.
2. Insert an Audio CD into the CD tray, it will say ‘ READING’, then wait a few seconds.
3.2 Playing CD Program
1. During Audio CD playback, the screen displays the track
number and the elapsed time.
2. How to play?
a. Press to select Previous Track, Press to select Next Track, Press to
Play/Pause
b. Press to Stop, and then press to Resume Playing.
3. To set playback mode, please follow the below 3 steps:
a. Press REPEAT to activate playback settings.
b. Turn the SCROLL/SELECT knob to view options: ‘Repeat off’, ‘Repeat one’,
‘ Repeat All’, ‘Repeat folder’ and ‘Random’.
c. Press the SCROLL/SELECT knob to confirm your selecting options.
4. In CD STOP mode, if the disc is a normal audio CD,
the display shows the total number of tracks and the
total track time.
3.3 Eject CD from CD Tray
1. Press EJECT, and then screen shows ‘OPEN’, CD can be ejected from CD tray.