Troubleshooting – SONIQ DVP1000 User Manual
Page 41
• Recharge a different power pack. If the same symptom
occurs, your AC adapter may be defective. If the second
battery pack charges without any problem, your first battery
pack may be defective or needs battery replacement.
Video does not appear with an
external component connected to
the DVD player
• Check that the TV is set to VIDEO or AV.
• Check that the video or audio cable is securely connected.
• A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
• Replace with a fully charged battery pack or use the AC
adapter.
• Replace with a fully charged battery pack or use the AC
adapter.
If the DVD player is overheated and the battery pack’s internal
temperature goes up to a certain level, you will not be able to
charge the battery pack.
In this occurs, remove the battery pack. After the battery pack
has sufficiently cooled down, charging will begin automatically.
• Check that the temperature is within the range of 50°F~86°F.
• Check that the DC cord of the AC adapter is plugged in correctly.
Battery pack does not charge
Power does not turn on
Power charge lamp does
not light (Battery pack does
not charge)
DVD
Battery
pack
operation
Battery
pack
operation
• Remove the DC cord from the battery pack and then re-plug.
If the battery pack is installed, remove the DC cord from the
battery pack before performing above procedure.
Power charge lamp quickly
flashes Green
Symptom
Check
Troubleshooting
- 40-