SONIQ DVP1000 - Manual (Page 36)

Using the Setup Menu
This menu allows you to set the format of the Digital Out signal.
This is the signal from the black
RCA connector on the rear panel
of the DVD and labelled Coaxial.
There are two output options,
plus coaxial output off:
• PCM
• RAW
• Off
PCM
Use the PCM setting when you have connected your Coaxial digital output to the
Coaxial digital input on a receiver/amplifier that does not have Dolby Digital decoding.
Raw
Use the RAW setting when you have connected your Coaxial digital output to the
Coaxial digital input of an amplifier that has Dolby Digital decoding.
Setup the Audio menu
Language Video Rating Audio
Digital out RAW
Off
PCM
Off
RAW
- 35 -
Setup the Rating menu
This facility enables you to set the following:
• Password
• Rating (of content)
• Restore factory settings (Load Factory)
Language Video Audio Rating
Password
Rating
Load factory ----
8. Adult
Reset
Password
This menu enables you to change the Rating level after you enter a valid
four-digit password. By default, there is no password set.
• To set a password, use the
CURSOR buttons to highlight
Password on the Start Setup page.
• Press the ENTER button.
• The password change menu will be displayed
with the password field selected as shown.
Note the unlocked ‘padlock’ symbol alongside
the password field.
• Use the numeric buttons (0 - 9) to enter a memorable 4-digit
number. For security reasons, arrows appear instead of the entered numbers.
• The padlock symbol will appear locked.