SONIQ DVP1000 - Manual (Page 30)

Using the Function Menu
Using the Number(0~9,10+) Button
By pressing the number(0~9) button, you can access directly to the desired track or
chapters while a disc is played. For track or chapter over 10, press (+10) and then (0-9)
button.
Using the LCD Button
Press LCD button on the panel, you can adjust the Brightness/Contrast/Color of video
with this setting to a desired level.
1. Brightness setting:
Press LCD button, the brightness information shows on the screen.
Use left( ) or right( ) buttons on the panel to choose the preferred brightness setting,
and then the panel will change to the selected setting.
2
. Contrast setting:
Press LCD button second, the c information shows on the screen.
Use left( ) or right( ) buttons on the panel to choose the preferred contrast setting,
and then the panel will change to the selected setting.
3
. color setting:
Press LCD button third, the information shows on the screen.
Use left( ) or right( ) buttons on the panel to choose the preferred color setting, and
then the panel will change to the selected setting.
To finish the setup operation
Press LCD again until the LCD setting information disappears.
ontrast
color
Using the CLEAR Button
Setting program or searching requires an input number. Press CLEAR button to clear
the number when the input number is wrong.
- 29 -