SONIQ CWR300ND - Manual (Page 68)

- 66 -
The following table describes the parameters of this page:
Field Description
Service Type
You can select the common service type, for
example, AUTH, DNS, or FTP. You can also define
a service name.

If you select Usual Service Name, the
corresponding parameter has the default settings.

If you select User-defined Service Name, you
need to enter the corresponding parameters.
Protocol
Choose the transport layer protocol that the service
type uses. You can choose TCP or UDP.
WAN Setting You can choose Interface or IP Address.
WAN Interface
Choose the WAN interface that will apply virtual
server.
WAN Port Choose the access port on the WAN.