SONIQ CWR300ND - Manual (Page 60)

- 58 -
Field Description
 In the encryption authentication, the wireless
client connects to the modem through the shared
key.
Data Rate
Choose the transmission rate of the wireless data.
You can choose Auto, 1 M, 2 M, 5.5 M, 11 M, 6 M,
9 M, 12 M, 18 M, 24 M, 36 M, 48 M, 54M,
MSC0-MSC15.
PreambleType
 Long Preamble: It means this card always
use long preamble.

Short Preamble: It means this card can
support short preamble capability.
Broadcast SSID
Select whether the modem broadcasts SSID or not.
You can select Enable or Disable.

Select Enable, the wireless client searches the
modem through broadcasting SSID.

Select Disable to hide SSID, the wireless
clients can not find the SSID.
Relay Blocking
Wireless isolation. Select Enable, the wireless
clients that are connected to the modem can not
intercommunication.
Ethernet to
Wireless Blocking Whether the wireless network can communicate
with the Ethernet network or not.
Wifi Multicast to
Unicast Enable it to using unicast to transmit multicast
packet
Aggregation
It is applied when the destination end of all MPDU
are for one STA.
Short GI
It is not recommended to enable GI in obvious
environment of Multi-path effect.
Apply Changes
Click it to apply the settings temporarily. If you want
to save the settings of this page permanently, click
Save in the lower left corner.