SONIQ CWR300ND User Manual
Page 46
- 44 -
Field
Description
Type
You can choose Fixed IP or DHCP.
If
select
Fixed IP, you should enter the
local IP address, remote IP address and
subnet mask.
If select DHCP, the router is a DHCP
client, the WAN IP address is assigned
by the remote DHCP server.
Local IP Address
Enter the IP address of WAN interface
provided by your ISP.
Netmask
Enter the subnet mask of the local IP
address.
Unnumbered
Select this checkbox to enable IP
unnumbered function.
Add
After configuring the parameters of this page,
click it to add a new PVC into the Current
ATM VC Table.
Modify
Select a PVC in the Current ATM VC Table,
then modify the parameters of this PVC. After
finishing, click it to apply the settings of this
PVC.
Current ATM VC Table
This table shows the existed PVCs. It shows
the interface name, channel mode, VPI/VCI,
encapsulation mode, local IP address,
remote IP address and other information. The
maximum item of this table is eight.
Click
in the PPPoE mode, the page shown in the following figure appears. In
this page, you can configure parameters of this PPPoE PVC.