Revel Sub 30 - Manual (Page 30)

SPECIFICATIONS
AMPLIFIER (Continued)
Equalization (Continued) –
Bandwidth: Continuously variable from 0.1 to 1.0 Octave
Level: Continuously variable from -14 to+6 dB
Low-Pass Filter –
Type: Low pass with ON/OFF switch
Slope: Selectable 24 or 48 dB per octave
Frequency: Selectable at 30, 40, 50, 60, 70, or 80 Hz
Phase: Continuously variable from 0 to 180°
Level: Continuously variable
High-Pass Filter –
Type: High pass, always on
Slope: Selectable 12 or 24 dB per octave
Frequencies: Selectable at 30, 40, 50, 60, 70, or 80 Hz
Audio Inputs: Left and right balanced (XLR) and unbalanced
(RCA) line level
Audio Outputs: Left and right balanced (XLR) and unbalanced
(RCA) high-pass line level to main amplifier
Left and right balanced (XLR) and unbalanced
(RCA) line level to auxiliary components
Trigger Inputs: Power connectors for triggering system power on
when 12 Vdc is applied to the terminals
Music/Film connectors for triggering CONTOUR
to Film EQ mode when 12 Vdc is applied to
the terminals
POWER ON MODE Switch: Selects either AUTO or 12 Vdc trigger-controlled
operation
POWER ON/OFF Switch: Selects either fully-off, or the operation mode
selected by the POWER ON MODE Switch
Power: 120 Vac @ 60 Hz, 720 Wrms
with T6.3AL SLO-BLO or Time-Lag fuse
240 Vac @ 50 Hz, 720 Wrms
with T6.3AL SLO-BLO or Time-Lag fuse
Switch: 12 V Trigger or AUTO
Revel, a division of Harman Specialty Group, constantly strives to update and improve existing products, as well as
create new ones. Therefore, the specifications and construction details in this and related Revel publications are
subject to change without notice. Kapton and Kevlar are registered trademarks of the E.I. du Pont de Nemours
Company. Revel Ultima is a trademark and Revel is a registered trademark of Harman International Industries, Inc.
© Harman International, 2003.
REVEL ULTIMA SUB 30
Owner’s Manual
30