Revel Sub 30 - Manual (Page 15)

Figure 6. How to connect
multiple REVEL ULTIMA SUB
30 subwoofers to a home
theater multi-channel controller
using the controller’s crossover.
MULTI-CHANNEL CONTROLLER WITH CROSSOVER
AND MULTIPLE REVEL ULTIMA SUB 30 SUB-
WOOFERS
Multiple REVEL ULTIMA SUB 30 subwoofers can be connected
in a “daisy-chain” with a multi-channel controller (using its
crossover) and power amplifier, as shown in Figure 6.
REVEL ULTIMA SUB 30
Owner’s Manual
15
#1 ULTIMA SUB 30 Rear Panel
(split view)
#2 ULTIMA SUB 30 Rear Panel
(split view)
Use L or R Input and Increase
Low Pass Level to +6 dB;
*Or Use Optional
Y-adapter, If Desired.
Main Amplifier
(rear)
To Main Speakers
Left Input
Left Right
Right Input
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller to SUB
“On” and all speakers to cross
over (typically) at 80 Hz.
or or
or
RCA cables
to #2 sub.
INPUT
or
(Optional)
RCA cables
to #3 sub.
INPUT
(Optional)
XLR cables
to #3 sub.
INPUT
or
RCA cables
to #1 sub.
AUX OUTPUT
or
or
or
*To SUB/LFE Output
(if using optional Y-adapter)
*To SUB/LFE Output
(if using optional Y-adapter)