Revel Sub 30 - Manual (Page 16)

Figure 7. How to connect
the REVEL ULTIMA
SUB 30 to a home theater
multi-channel controller using
the subwoofer’s internal
crossover.
APPLICATIONS (Continued)
MULTI-CHANNEL CONTROLLER AND A REVEL ULTIMA
SUB 30 WITH CROSSOVER
In this application, the REVEL ULTIMA SUB 30’s
internal crossover is used to interconnect a home theater
multi-channel controller, as shown in Figure 7.
REVEL ULTIMA SUB 30
Owner’s Manual
16
ULTIMA SUB 30 Rear Panel (split view)
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller outputs to
full-range L/R Front and no SUB.
If applicable, set all other channels
to pass 80 Hz (typically) and above.
Below 80 Hz (typically), signals will
route to the ULTIMA SUB 30.
Main Amplifier
(rear)
To Main Speakers
Left Input
Left Right
Right Input
or
or
or or