Revel Sub 30 - Manual (Page 10)

Figure 4. The REVEL
ULTIMA SUB 30’s rear panel
layout shows locations of controls,
as well as audio
and power connectors.
REAR PANEL LAYOUT
❶
EQ ALL : Use this control to bypass all three parametric equalizers
for an audible demonstration of the equalization effect. It can
also prove valuable during the equalization process. For example,
to hear the effect of only one or two of the equalizers, set the
level controls of the remaining equalizer(s) at the “12 o’clock”
position.
❷
EQ 1~ EQ 3 : The three parametric equalizers include variable
controls for Frequency , Bandwidth , and Level . Use these controls
to modify the frequency response at three points, adjustable
from 18 to 80 Hz, across a bandwidth from 0.1 to 1.0 octaves,
with level boost up to 6 dB or level cut to -14 dB.
REVEL ULTIMA SUB 30
Owner’s Manual
10
3O