Reloop DIGITAL JOCKEY INTERFACE EDITION - Manual (Page 38)

AUDIO DEVICES
Please open the rider „audio devices“.
In the menue „Used Audio Devices“ please choose „ASIO device“.
Open the sub rider „ASIO Device Setting Page“ and in the preferences „Audio
Device“ select „Digital Jockey Interface ASIO“.
In the lower type select „4 channels“.
Under the option „Stero Mixed Output plus Monitoring Headphones“ under the
item „Mixed Output“ select „OUT 0-DIGITAL JOCKEY-I“ for the left side and
„OUT 1-DIGITAL JOCKEY-I“ for the right side.
Under the item „Headphones“ select „OUT 2-DIGITAL JOCKEY-I“ for the left
side and „OUT 3-DIGITAL JOCKEY-I“ for the right side.
In order to enable the the inputs (microphone or phono/line source) the
following adjustments have to be carried out:
Checkmark „Enable Audio Input“.
If you would like to use a microphone select „IN 0-DIGITAL JOCKEY-I“ for the
left side and „IN 1-DIGITAL JOCKEY-I“ for the right side.
If you want to integrate the phono/line input select „IN 2-DIGITAL JOCKEY-I“ for
the left side and „IN 3-DIGITAL JOCKEY-I“ for the right side. Confirm your
adjustments with „OK“.
NOTE!
These settings have to carried out only once.
38
ENGLISH