RCBS The Grand - Manual (Page 3)

THE “GRAND”
1 POWDER SYSTEM - Hull activated, no hull, no powder.
No need to manually turn powder on and off. No spillage of
powder can occur.
2 SHOT SYSTEM - Hull activated, no hull, no shot. No need
to manually turn shot on and off. No spillage of shot when
problems occur.
3 CASE HOLDERS - Easy removal of hull at all stations.
Universal 12 and 20 gauge case holders allows cases to
be sized down around the rim.
• The combination of the Powder System, Shot System and
the Case Holders allows the user to reload one shell
without fear of spillage.
4 PRIMING SYSTEM - Allows only one primer to feed at a
time and is an extremely reliable primer feed system.
5 STEEL SIZE RING - Provides complete resizing of high
and low base hulls. Not found in most presses.
• AUTO INDEX - Simple and very reliable automatic indexing
system that can be easily removed for manual indexing.
6 TILT-OUT WAD GUIDE - For easy and convenient feeding
of wads.
• MASSIVE FRAME - With compound leverage for smooth
solid feel.
7 QUICK DRAIN SYSTEM - Both powder and shot hoppers
have three locating positions. Off, on, and a forward drain
position for quick and convenient removal.
8 QUICK CHANGE - Of powder and shot bushings. Changes
over in less than one minute.
9 POWDER CHARGE - Is easy to check because the powder
station is directly in front of the press and it is easy and
convenient to remove the powder charge hull.
10 LARGE OPEN FRAME - Designed for convenient easy
access to all 8 stations.
• EASY CONVERSION - Changing from 12 gauge to 20
gauge is quick and easy with our convenient conversion kit.
11 SHOT & POWDER HOPPERS - Holds 25 pounds of shot
and 1 pound of powder.
1
11
2
3
9
10
4
5
6
8
7
89001 THE GRAND, 12 ga. Shotshell Press
89003 THE GRAND, 20 ga. Shotshell Press
89005 Shotshell Press Conversion Kit, 20 ga.
89007 Shotshell Press Conversion Kit, 12 ga.
89010 Riser Stand
89100 Charge Bar
For shot and powder bushing
information see page 14.
2429_RCBS Grand Instr 1/31/05 2:33 PM Page 3