Motor installation – E-flite Super Airliner DF ARF User Manual

Page 13

Motor Installation

Required Parts

• Wing

• Motor (2)

• Brushless speed control (2)

• 2mm x 6mm screw (4)

• Red wire, 25" (680mm) (2)

• Black wire, 25" (680mm) (2)

• Foam motor nacelle (right and left) (2)

• Wiring decal

• Heat shrink tubing: 1/4" (6mm)

Required Tools and Adhesives

• Phillips screwdriver • Flat blade screwdriver

• Soldering iron

• Solder

• 30-minute epoxy • Rubber bands

• Hobby knife

• Small round file

• Model clamps



1. Route the motor wires through the pre-drilled

holes in the fan housing.