E-flite Tensor 4D ARF - Manual (Page 37)

37
Final Assembly
Required Parts
Assembled airframe
.065" x 6" carbon rod (2)
Upper and lower side force generator (2)
Required Tools and Adhesives
Foam-safe CA
 1. Locate a .065" x 6" carbon rod. Position the
rod from the tip of the stabilizer to the bottom
of the fin. Use foam-safe CA to glue the rod
into position.
 2. Repeat step 1 for the remaining carbon rod.
 3. While the plane is upside down, install
the lower fences onto the bottom wing.