E-flite Tensor 4D ARF - Manual (Page 11)

11
Radio Installation
Required Parts
Fuselage assembly
Micro control connector (2)
Control connector backplate (2)
2mm x 4mm screw (2)
Micro control horn (2)
Micro control horn backplate (2)
.065" x 16" carbon pushrod (2)
1/32" x 2" pushrod end (4)
Micro pushrod keeper (2)
String
Required Tools and Adhesives
Foam-safe CA Servo tape
Razor saw
 1. Plug in the aileron, elevator and rudder servos
to the receiver following the instructions from
your radio system. Turn on the radio and center
the trims on the transmitter. Install long servo
arms on the servos.