E-flite Ascent EP Park Glider ARF - Manual (Page 7)

Step 5. Slide the other wing panel onto the wing tube, joining
the wing halves.
Note: The wing of the Ascent ™ is not glued together. The
wing panels separate to allow for ease of transportation.
Step 6. To mount the wing to the fuselage, slide the wing
dowels into the predrilled holes in the forward portion of the
wing saddle just behind the canopy.
Step 7. Secure the wing to the fuselage with the 4-40 x 1/2"
wing mounting hex screws and 4-40 washers provided. Use a
3/32" hex driver to tighten the wing screws.
Note: Remove the wing for now. You will need to re-
install it during the alignment of the horizontal stabilizer.
8
A
B