Watts 2 - Manual (Page 2)

IS-2-M2 1320 EDP# 1910509
© Watts, 2013
USA: Tel. (978) 688-1811 • Fax: (978) 794-1848 • www.watts.com
Canada: (905) 332-4090 • Fax: (905) 332-7068 • www.wattsca
A Watts Water Technologies Company
Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and
workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects
within the warranty period, the Company will, at its option, replace or recondition the product without charge.
THe WArrANTY SeT FOrTH HereiN iS giVeN eXPreSSLY AND iS THe ONLY WArrANTY giVeN BY THe COMPANY
WiTH reSPeCT TO THe PrODUCT. THe COMPANY MAKeS NO OTHer WArrANTieS, eXPreSS Or iMPLieD. THe
COMPANY HereBY SPeCiFiCALLY DiSCLAiMS ALL OTHer WArrANTieS, eXPreSS Or iMPLieD, iNCLUDiNg BUT NOT
LiMiTeD TO THe iMPLieD WArrANTieS OF MerCHANTABiLiTY AND FiTNeSS FOr A PArTiCULAr PUrPOSe.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach
of warranty, and the Company shall not be responsible for any incidental, special or consequential damages, including
without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not
work properly, other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material,
damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.
This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or
alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion
or limitation of incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited
Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult
applicable state laws to determine your rights. SO FAr AS iS CONSiSTeNT WiTH APPLiCABLe STATe LAW, ANY iMPLieD
WArrANTieS THAT MAY NOT Be DiSCLAiMeD, iNCLUDiNg THe iMPLieD WArrANTieS OF MerCHANTABiLiTY AND
FiTNeSS FOr A PArTiCULAr PUrPOSe, Are LiMiTeD iN DUrATiON TO ONe YeAr FrOM THe DATe OF OrigiNAL
SHiPMeNT.
Maintenance
1. Shutoff water supply and loosen adapter screws to remove valve.
2. Remove O-rings and screws from adapters.
3. Move lever to on position and unscrew from spindle.
4. Use 3 ⁄
8
" allen wrench to remove hose adapters and remove bottom
Teflon ® discs. This allows removal of the balls from the spindle by
shaking slightly.
5. Insert a pencil through rear of valve to pry upper Teflon ® discs loose.
6. To replace spindle O-rings, use 1 ⁄
4
" allen wrench to remove side plug.
7. Reassemble by replacing all seals, assembling in reverse order.
Tighten adapters securely to avoid leakage.
O-ring
Screw
Lever
3 ⁄
4
" Hose
Connection
O-ring
2 1 ⁄
4
"
3 9 ⁄
16
"
1 1
⁄
16
"
2 3 ⁄
8
"
2 3 ⁄
8
"
1 ⁄
2
" ell adapters for
exposed pipe
1 ⁄
2
" Male connections for concealed piping
WArNiNg: This product contains chemicals known to the
State of California to cause cancer and birth defects or
other reproductive harm.
For more information: www.watts.com/prop65