Brother HL-1800 series - Manual (Page 22)

1-12
Recommended paper
Europe USA
Plain Paper Xerox Premier 80 g/m 2
Xerox Business 80 g/m2
IGEPA X-Press 80 g/m2
Xerox 4200DP 20 lb
Champion Paper One 20 lb
Hammermill Laser Paper 24 lb
Recycled Paper Steinbis Recycling Copy 80 g/m2
Transparency 3M CG3300 3M CG 3300
Label Avery laser label L7163 Avery laser label #5160
♦
Before buying a lot of paper, please test some paper to make sure
that it is suitable.
♦
Use paper that is designed for plain paper copying
♦
Use paper that is 75 to 90 g/m 2
♦
Use neutral paper. Do not use acidic or alkaline paper.
♦
Use Long grain paper
♦
Use paper with a moisture content of about 5%
♦
This printer can use recycled paper that meets the DIN 19309
specification.
Recommended paper should have the following technical specifications:
♦
Basis Wait 75 – 90 (g/m2)
♦
Thickness 80-110 (micrometer)
♦
Roughness Higher than 20 (seconds)
♦
Stiffness 90-150 (cm3/100)
♦
Grain Direction Long Grain
♦
Volume Resistivity 10e9-10e11 (ohm)
♦
Surface Resistivity 10e10 – 10e12 (ohm-cm)
♦
Filler CaCO3 (Neutral)
♦
Ash Content below 23 (wt%)
♦
Brightness higher than 80 (%)
♦
Opacity higher than 85 (%)