Banner MICRO-AMP Series - Manual (Page 10)

Modulated remote sensors require specially de-
signed cable for efficient sensor performance.
Extension cable is available in 100 foot (30m)
lengths.
Extension Cable
This is mild-steel flexible tubing used
with the compression fittings, at right,
to achieve maximum protection to
sensor cables.
I.D. = 5/16"; O.D. = 7/16".
Accessories for High Performance Modulated Remote Sensors
PVC-6 6 feet (1,8m)
PVC-30 30 feet (9m)
Hookup of LR300 and PT300 Hookup of SP300D, SP300L, LP400WB, SP1000V
Hookup of SP320D
Sensor Hookup Diagrams for MA3-4 MICRO-AMP Modules
(continued)
Remote sensor cables may be run up to 30 feet (9m) away from the MA3-
4 amplifier. All sensor models are available from the factory with 30 feet
of cable, installed as an option.
When splicing additional cable to the standard 6-1/2 foot length, it is
important to use a separate shielded cable for emitter and receiver wires.
Combining emitter and receiver wires together in the same cable (even if
the cable is shielded) will result in direct coupling of the emitter signal to
the receiver leads.
This is called "cable crosstalk" and will not allow full amplifier sensitivity
setting without an amplifier "lock on" situation, which appears as a
continuous LIGHT condition. Banner offers 100 foot (30m) lengths of
sensor extension cable (see below) which, if used for cable splicing, will
minimize the chances for cable crosstalk.
IMPORTANT : Cable Splicing Information
Heavy duty PVC tubing used to pro-
tect sensor cable in applications in-
volving moisture and/or corrosive
materials. I.D. = 1/4"; O.D. = 3/8".
Extension Cable
Model
ESC-100
RSC-100
SSC-100
EC300E-100
EC300R-100
EC320-100
Used on Sensor Models
# of
Wires
Wire Colors
White, Green, Shield
Red, Black, Shield
White, Green, Red, Black,
Shield
White, Shield
Red, Shield
White, Shield, Red, Shield
PT200, PT250, PT400,
SP300RL
LR200, LR250, LR400,
SP300EL
SP300D, SP300L, LP400WB,
SP1000V
LR300
PT300
SP320D
3
3
5
2
2
4
Cable Protection
AC-6 6 feet (1,8m)
AC-30 30 feet (9m)
10
LR400, PT400, LP400WB
Compression Fittings used to Attach
Protective Tubing to Remote Sensors
CF3-8 3/8"-32 thread
CF7-16 7/16"-20 thread
Used to Attach Tubing
to these Models Compression Fitting
Model
SP300EL, SP300RL, SP300D,
SP300L, LR200, PT200
CF3-8
CF7-16