Banner K80L General Purpose EZ-LIGHT - Manual (Page 3)

Mounting Brackets
All measurements in mm
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼")
hardware
• 30 mm mounting hole
• 12-ga. stainless steel
Hole center spacing: A to B=40.0
Hole size: A=ø 6.3, B=27.3 x 6.3, C=ø 30.5
SMB30SC
• Swivel bracket with 30 mm
mounting hole
• Black reinforced thermo-
plastic polyester
• Stainless steel mounting
and swivel locking hard-
ware included
Hole center spacing: A to B=50.8
Hole size: A=ø 7.0
SMB30FA
• Swivel bracket with tilt and
pan movement for preci-
sion adjustment
• 30 mm mounting hole
• 12-ga. 304 stainless steel
A=3/8 - 16 x 50.8
Hole size: B=ø 30.1
SMBAMS30P
• Flat SMBAMS series
bracket
• 30 mm mounting hole
• Articulation slots for 90+°
rotation
• 12-ga. 300 series stainless
steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
SMB30MM
• 12-ga. stainless steel
bracket with curved
mounting slots for versatili-
ty and orientation
• Clearance for M6 (¼")
hardware
• 30 mm mounting hole
Hole center spacing: A=51.0, A to B=25.4
Hole size: A=42.6 x 7.0, B=ø 6.4, C=ø 30.1
SMBAMS30RA
• Right-angle SMBAMS ser-
ies bracket
• 30 mm mounting hole
• Articulation slots for 90+°
rotation
• 12-ga. cold rolled stainless
steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
EZ-LIGHT™ Indicators — 85-130V ac
P/N 134548 rev. A www.bannerengineering.com - tel: 763-544-3164 3