Banner K80L General Purpose EZ-LIGHT - Manual

AC-operated, multi-color, general-purpose indicators
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com .
• Rugged, cost-effective and easy-to-install indicators available in K50 or K80
housing style
• Illumination provides easy-to-see operator guidance and equipment status indica-
tion
• Compact devices are completely self-contained — no controller needed
• 85 to 130V ac operation
• Displays 3 colors
• Immune to ambient light, EMI and RFI interference
QPMA
EU
R O -S TY LE • PIGTAIL • PU R • CA
B LE
CALL FACTORY
Call Factory for more information.
Models
Model Construction Connection* LED Function** Inputs
K50LGRYA120Q
50 mm dome/ 30 mm
mount polycarbonate
5-pin Micro QD 3 Color: Green, Red, Yellow 85–130V ac
K80LGRYA120Q
50 mm dome/Flat or
DIN-mount polycar-
bonate
* Integral QD models are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LGRYA120QP).
• For 2 m (6.5') PVC cable, omit suffix Q from model number (example, K50LGRYA120).
• A model with a QD requires a mating cable (see
5-pin Micro-Style Cordsets with Shield on page 2)
** Contact factory for other colors and color combinations.
Specifications
Supply Voltage and Current
85 to 130V ac @ 15 mA max.
Supply Protection Circuitry
Protected against transient voltages
Indicators
LEDs are independently selected: Green, Red, or Yel-
low.
Input Response Time
Indicator ON/OFF: 1 ms max.
Environmental Rating
Rated IEC IP67. K50L models fully encapsulated; K80L
has encapsulated electronics only. K50L QD models
meet IP69K, per DIN 40050-9; cabled models also
meet IP69K if the cable and cable entrance are pro-
teced from high-pressure spray.
Connections
5-pin Micro-style integral QD (Q), 150 mm (6") pigtail
QD (QP), or 2 m (6.5') integral cable, depending on
model
K80L models: terminal-wired models available for use
with bulk cable; compression fitting optional. Contact
Factory for cable information.
Operating Conditions
−40° to +50° C (−40° to +122° F)
90% @ 55º C max. relative humidity (non-condensing)
Certifications
EZ-LIGHT™ Indicators — 85-130V ac
P/N 134548 rev. A 3/17/2011
0 134548 3