Brackets, Retroreflective targets – Banner K80 Pick-to-Light EZ-LIGHT User Manual
Page 5
SMB30MM
• 12-ga. stainless steel
bracket with curved
mounting slots for versatile
orientation
• Clearance for M6 (¼")
hardware
• Mounting hole for 30 mm
sensor
70
57
A
B
C
57
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMBAMS30P
• Flat SMBAMS series
bracket
• 30 mm hole for mounting
sensors
• Articulation slots for 90+°
rotation
• 12-ga. 300 series stainless
steel
45
93
A
C
B
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
Brackets
SMBDX80DIN
• Black reinforced thermo-
plastic
• Bracket for mounting on 35
mm DIN rail
89
89
Retroreflective Targets
NOTE:
.
BRT-2X2
• Square, acrylic target
• Reflectivity factor: 1.0
• Max. temperature: 50° C (+122º F)
• Optional brackets are available
• Approximate size: 51 mm x 51 mm
BRT-35X35B
• Square, acrylic target
• Reflectivity Factor: 1.3
• Temperature: -20° to +60° C
• Approximate size: 35 mm x 35 mm
BRT-51X51BM
• Square, acrylic target
• Reflectivity Factor: 1.5
• Max. Temperature: 50° C
• Micro-prism geometry
• Optional brackets are available
• Approximate size: 51 mm x 51 mm
BRT-50D
• Round, acrylic target with mounting
stud
• Reflectivity factor: 1.0
• Temperature: -20° to +60° C
• Optional brackets are available
• Approximate size: 50 mm diameter
BRT- 100X18A
EZ-LIGHT® K50 and K80 Specialty — 3-Color
P/N 137551_web
Rev. C
www.bannerengineering.com - tel: 763-544-3164
5