Banner Q25 Series - Manual

Printed in USA 01/05 P/N 121517
Q25 Sensors – ac-Voltage Series
Self-contained ac-operated sensors
Sensing Mode Range LED Output Model*
Opposed 20 m (66')
Infrared
950 nm
– Q253E
LO Q25AW3R
DO Q25RW3R
Polarized
Retroreflective
2 m (79")
Visible Red
680 nm
LO Q25AW3LP
DO Q25RW3LP
Fixed-Field
25 mm (1") cutoff
Infrared
880 nm
LO Q25AW3FF25
DO Q25RW3FF25
50 mm (2") cutoff
LO Q25AW3FF50
DO Q25RW3FF50
100 mm (4") cutoff
LO Q25AW3FF100
DO Q25RW3FF100
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., Q253E W/30).
• 4-pin Micro-style QD models: add suffix “Q1” (e.g., Q253EQ1). A model with a QD connector requires a mating cable. (See page 7.)
P
Features
• Featuring EZ-BEAM ® technology for reliable sensing without the need for
adjustments
• Rectangular 25 mm plastic housing with 18 mm threaded mounting base in
opposed, retroreflective or fixed-field modes
• Completely epoxy-encapsulated to provide superior durability, even in harsh
sensing environments to IP69K
• Innovative dual-indicator system takes the guesswork out of sensor performance
monitoring
• 20 to 250V ac (3-wire hookup); SPST solid-state switch output, maximum
load 300 mA
Models
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.