Banner TM18 Series - Manual (Page 3)

P/N 69857 rev. E
3
TM18 Series Sensors –
Self-Contained Photoelectric Sensors in a Metal Housing
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Supply Voltage 10 to 30V dc (10% maximum ripple) at less than 40 mA, exclusive of load
Protected against reverse polarity and transient voltages
Output Configuration Solid-state selectable models: NPN or PNP (current sinking or sourcing); depending on hookup
Dedicated single-output models: NPN or PNP (current sinking or sourcing); depending on model
Rating: 300 mA maximum output at 25°C
Off-state leakage current: NPN less than 100 µA @ 30V dc
PNP less than 300 µA @ 30V dc
ON-state saturation voltage: less than 1V @ 10 mA; less than 1.5V @ 300 mA
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response 3 milliseconds ON/OFF
NOTE: 300 millisecond delay on power-up; outputs do not conduct during this time
Repeatability 300 microseconds maximum
Adjustments Push-button dark SET, light/dark operate toggle
NPN/PNP selected via hookup
Indicators 2 LED indicators:
Power ON/OFF (green)
Signal (bi-color yellow/green)
Construction Copper/nickel-plated zinc alloy housing; rated IEC IP67; NEMA 6
Connections 2 m (6.5') 4-wire PVC cable, 9 m (30') PVC cable, 4-pin Euro-style integral QD, or 4-pin Euro-style 150 mm
(6") polyurethane pigtail QD, depending on model (see model listing on page 1)
Operating Conditions Temperature: -20° to +55° C (-4° to +132° F)
Relative Humidity: 90% @ 50° C (non-condensing)
Certifications
Specifications
TM18BM6DQ
SET
SIGNAL POWER
10-30
V dc
300mA
max
load 40mA
30.0 mm
(1.18")
30.0 mm
(1.18")
15.0 mm
(0.59")
54.0 mm
(2.13")
41.0 mm
(1.61")
Green Power LED
Bi-Color Yellow/Green Signal LED
SET Button
Cable or
150 mm (6")
polyurethane (PUR)
pigtail QD
17 mm
(0.7")
15 mm
(0.6")
Dimensions and Features
F