Banner S18 Series - Manual (Page 4)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
S186ELD Laser Diode Emitter
P/N 35749 rev. D
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year.
Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be
defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.
Mounting Brackets
SMB46A
• 12-gauge stainless steel
• Precision sensor alignment
adjustment
• 2 mm shortarm hex key included
• Clearance for M5 (#10) hardware
Quick-Disconnect (QD) Cordsets
Style Model Length Dimensions Pinout
Euro-style
4-Pin
Straight
MQDC-406
MQDC-415
MQDC-430 2 m (6.5')
5 m (15')
10 m (30')
M12 x 1
ø 15 mm
44 mm
max.
2
3
4
1
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Euro-style
4-Pin
Right-angle
MQDC-406RA
MQDC-415RA
MQDC-430RA 2 m (6.5')
5 m (15')
10 m (30')
38 mm
max.
M12 x 1
ø 15 mm
38 mm
max.
Reflective Tape
Model
Reflectivity
Factor
Maximum
Temperature
Size Unit
BRT-THG-4X4-5
0.7 +60° C (+140° F)
100 x 100 mm
(4" x 4")
Package of 5
BRT-THG-8.5X11-2
216 x 280 mm
(8.5" x 11")
Package of 2
BRT-THG-18X36
457 x 914 mm
(18" x 36")
Single Sheet
SMB18A
• 11-gauge stainless steel
• Right-angle mounting bracket
• Curved mounting slot for versatile
orientation
• Clearance for M4 (#8) hardware
For bracket dimensions, visit www.bannerengineering.com .