Banner ECONO-BEAM SE61 Series User Manual
Econo-beam, Diffuse-mode sensors, Diffuse-mode features

ECONO-BEAM
®
Diffuse-Mode Sensors
for 120V ac operation
Printed in USA
P/N 37429A0A
ECONO-BEAM
®
Diffuse-Mode Features
•
Small, low-cost, self-contained sensors engineered to provide reliable sensing,
primarily in straight-forward OEM applications
•
Simple installation with no adjustments
•
200 mm (8") sensing range
•
120V ac operation
•
Totally solid-state and epoxy-encapsulated for unlimited life
•
SPST solid-state (FET) output switch rated at 300 milliamps
•
Choose models for light operate or dark operate
•
Very compact, yet rugged enough to withstand tough sensing environments; rated
IP66, NEMA 4X
•
2 m (6.5') is standard cable length; 9 m (30') cables also available
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety
Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Infrared, 880 nm
ECONO-BEAM Diffuse-Mode AC Models
200 mm
(8")
2 m (6.5')
1
10
100
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
1.0 mm
0.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Diffuse Mode
250 mm
10.0 in
200 mm
8.0 in
150 mm
6.0 in
100 mm
4.0 in
50 mm
2.0 in
0
0
2.5 mm
5.0 mm
7.5 mm
2.5 mm
5.0 mm
7.5 mm
0
0.1 in
0.2 in
0.3 in
0.1 in
0.2 in
0.3 in
DISTANCE
Diffuse Mode
Models
Range
Cable*
Supply
Voltage
Output
Type
Excess Gain
Beam Pattern
120V ac
SPST
Solid-
state
LO
SE61AW1D
SE61RW1D
2 m (6.5')
SPST
Solid-
state
DO
Performance based on 90% reflectance white test card
*9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g. - SE61AW1D W/30)