Metrohm 762 IC Interface - Manual (Page 27)

3.2 Operation via «IC Net»
762 IC Interface
23
Second press on RUN/STOP means 'stop' when measuring
If this option is enabled, the running data ac-
quisition will be stopped if key 33 or key 55
[ RUN/STOP ] on the 762 IC Interface front
panel is pressed. This is equal to
Stop determi-
nation .
If this option is disabled, the running data ac-
quisition will not be stopped if key 33 or key 55
[ RUN/STOP ] on the 762 IC Interface front
panel is pressed.
Read current parameters from 762 IC Interface.
Send current parameters to 762 IC Interface.
RS settings
The RS settings tab of the 762 IC Interface window contains RS232 pa-
rameters for the 762 IC Interface.
Baud Rate Baud rate of the device.
Selection:
1200...115200
Default value: 115200
Parity Parity check.
Selection:
None , Even , Odd
Default value: None
Handshake Enable/disable software handshake mode.
Selection:
Swchar , none
Default value:
SWchar