Metrohm 762 IC Interface - Manual (Page 25)

3.1 Manual operation
762 IC Interface
21
3 Operation
3.1 Manual operation
Switch instrument on/off
The 762 IC Interface 762 is switched on and off using mains
switch 11 on the front of the instrument (see Fig. 2 and Fig. 4).
After the instrument has been switched on the mains pilot lamp 22
lights up to show that the instrument is ready for use.
Start/stop determination
RUN/
STOP
Determination on System 1 or System 2 can be started or
stopped manually using the key 33 or key 55.
RUN:
Manual start of a determination ( Start determination ).
STOP: Manual stop of a determination or data acquisition ( Stop
determination or Stop data acquisition ).
This function is only available if the Second press of
Run/Stop button means 'stop' when measuring option is en-
abled in the 762 IC Interface window.
The status display 4 4 or 66 within the RUN/STOP key 33 or 55 have
the following meaning:
LED dark:
No system loaded
LED lit up: Instrument ready (waiting for external start)
LED flashes: Determination running