Metrohm 940 Professional IC Vario ONE/HPG - Manual (Page 87)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Technical specifications
940 Professional IC Vario ONE/HPG (2.940.1140)
￭￭￭￭￭￭￭￭ 79
Gradient capabil-
ity Isocratic or gradient (extendable to quaternary)
Profile Step, linear, convex and concave
Resolution < 1 nL/min
7.9 Injection valve
Actuator switch-
ing time typ. 100 ms
Maximum operat-
ing pressure 35 MPa (350 bar)
Material PEEK
7.10 Detector
You can find the technical specifications for the detector in the detector's
manual.
7.11 Sample degasser
Material Fluoropolymer
Resistance to sol-
vents No restriction (except PFC)
Time to establish
vacuum < 60 s
7.12 Power connection
Required voltage 100 - 240 V ± 10% (autosensing)
Required fre-
quency 50 - 60 Hz ± 3 Hz (autosensing)
Power consump-
tion ￭ 65 W for typical analysis application
￭ 25 W standby (conductivity detector to 40 °C)
Power supply unit ￭ Up to 300 W maximum, electronically monitored
￭ Internal fuse 3.15 A